home *** CD-ROM | disk | FTP | other *** search
- PRINT OPTIONS MENU
- ==================
-
- This menu contains all of the print options used to control how an
- average sheet will appear when printed. By changing various options, a
- fully customized printout may be generated. The options used to produce
- the sheet may then be saved to disk for use at a later time.
-
- Along side of each option is the initial default setting as set by
- the Deafults Editor which were saved to disk along with the Team and
- Bowler databases when the league was first defined in Setup. Any changes
- made to the "Default Parameters Menu" (Main Menu option 1), will be
- reflected here.
-
-
- Print Average Sheets
-
- ╔═══════════════════════════════╗
- ║ PRINT OPTIONS MENU ║
- ╠═════════════════════════╤═════╣
- ║ Print League Name │Y ║
- ║ Round Averages │N ║
- ║ Number of AVERAGES │* ║
- ║ Enhanced AVERAGES │N ║
- ║ Print SPARES │Y ║
- ║ Number of HIGH SERIES │3 ║
- ║ Number of HIGH SINGLES │3 ║
- ║ Number of HIGH NO MARKS │3 ║
- ║ Number of SIXTY NINES │2 ║
- ║ Print CLUB Scores │Y ║
- ║ Print TEAM STANDINGS │Y ║
- ║ Enhanced TEAM STANDINGS │N ║
- ║ Eject PAGE When Done │N ║
- ╚═════════════════════════╧═════╝
-
-
- Left unchanged, BowlStat will print a "standard" average sheet as
- determined by the order of the menu selections in the PRINT OPTIONS MENU.
- The number of bowler names printed for each award are determined by the
- values assigned to each option. This standard sheet consists of:
-
- o League Name
- o Bowler Averages
- o Bowler HIGH SERIES
- o Bowler HIGH SINGLES
- o Bowler HIGH NO MARKS
- o Bowler SIXTY NINES
- o Team Standings
-
- Print League Name (default "Y")
- -----------------
-
- A setting of "Y" will cause the current League Name to be printed,
- boardered with "*"'s both above and below. Also, the current date (in
- MM-DD-YYYY format), will be printed in the upper right hand corner of the
- page. This option is internally set to "Y" for database dumps and cannot
- be changed.
-
- Round Averages (default "N")
- --------------
-
- Change this option to "Y" to print averages rounded to the nearest
- 10th of a pin. For example, 120.578 would be printed as 120.6, with the
- default setting, it would be printed as 120.5
-
-
- Number of AVERAGES (default "*" = all)
- ------------------
-
- This option specifies the maximun number of bowler names to print
- when printing averages. The default is "*", all bowlers. To omit averages
- from the printout, enter a value of 0.
-
- BowlStat divides the average sheet into two halves (a left and
- right). LADIES averages will be printed in the left half and MENS averages
- will appear in the right (ladies before gentlemen). If the league is a
- "mens or ladies only" league, BowlStat will print the averages in the left
- column only.
-
-
- Enhanced AVERAGES (default "N")
- -----------------
-
- Normally, the average award consists of the bowlers name and
- average. The printout may be enhanced by changing the default option to
- "Y". Along with the bowlers name and average, the current total pinfall
- and the number of strings bowled will also appear.
-
- To make room for the enhanced information, BowlStat will print only
- the initial of the bowlers first name. With the option at default, as much
- of the first name will be printed, determined by existing column
- limitations.
-
- NORMAL: Stone, Kevin 172.8
- ENHANCED: Stone, K. 3456 20 172.8
-
-
- Print SPARES (default "Y")
- ------------
-
- To omit "Spare" bowlers from ALL printouts, change the default
- option to "N". All sheets printed will contain only regular bowlers.
-
-
- Number of HIGH SERIES (default "3")
- ---------------------
-
- Enter the number of bowler names to print for the "HIGH SERIES"
- award. To omit this award from the prinout, enter a value of 0.
-
-
- Number of HIGH SINGLES (default "3")
- ----------------------
-
- Enter the number of bowler names to print for the "HIGH SINGLE"
- individual award. To omit this award form the printout, enter a value of
- 0.
-
-
- Number of HI NO MARKS (default "3")
- ---------------------
-
- The HIGH NO MARK award is used in the Candlepin Bowling game. It is
- the string score of a bowler who has fail to either bowl a strike or spare
- and indicates how well a bowler has "pinned".
-
- Enter the number of bowler names to print for the "HIGH NO MARK"
- individual award. To omit this award form the printout, enter a value of
- 0.
-
-
- Number of SIXTY NINES (default "2")
- ---------------------
-
- The SIXTY NINES award is used in the Candlepin Bolwing game. It is
- number of strings in which a bowler has scored a vaule of 69 in one of the
- frames bowled. For every one bowled, the bowler contributes a sum of money
- ($.25) to a pot and the bowler with the highest total at the end of the
- season receives all of the money collected.
-
- Enter the number of bowler names to print for the "69'S"
- individual award. To omit this award form the printout, enter a value of
- 0.
-
-
- Print CLUB SCORES (default "Y")
- -----------------
-
- BowlStat will print all bowler names and scores for anyone who
- meets the minimum club requirements, as defined in the Default Parameters
- Menu. The club can be either an individual string or high series. If CLUB
- SCORES are not to be printed, change the default option to "N".
-
-
- SINGLE CLUB:
-
- DATE NAME 1 2 3 TOTAL
- ---- ---- ---------------------
- 03-07-1991 Kevin Stone 198
-
-
- SERIES CLUB:
-
- DATE NAME 1 2 3 TOTAL
- ---- ---- ---------------------
- 03-07-1991 Kevin Stone 201 183 196 580
-
-
- BowlStat retrieves the Club Scores from the Yearly Statistics file.
- Because the file becomes larger, as more Yearly Statistics are added, the
- printout speed will decrease over time. This is normal and should be no
- cause for concern.
-
- Print TEAM STANDINGS (default "Y")
- --------------------
-
- This option turns on/off the printing of team standings. Standings
- will appear in the order of points WON, from highest to lowest. If Team
- Standings are not required, change the default option to "N".
-
-
- Enhanced TEAM STANDINGS (default = "N")
- -----------------------
-
- If Team Standings are to be printed, they can be enhanced with this
- option. Along with the normal output of Team Name, Point Won, Points Lost
- and Total Points, BowlStat will include Total Pinfall, High Single, High
- Series and the percentage of wins vs losses.
-
- NORMAL:
-
- POINTS
- TEAM NAME WON LOST TOTAL
- --------- ------------------
- Kingpins 32 12 44
-
-
- ENHANCED:
-
- TOTAL POINTS HIGH
- TEAM NAME PINFALL WON LOST TOTAL % AVG. SINGLE SERIES
- --------- ------- ------------------ ------ --------------
- Kingpins 1234 32 12 44 87.5 643 1343
-
-
- Eject PAGE When Done (deafult = "Y")
- --------------------
-
- This option is valid only if the avearage sheet is to be printed on
- a printer, as selected by the OUTPUT MENU. By changing the default option
- to "N", the printer will NOT go to the top of the next page when the
- printing of the average sheet has been completed. The option is
- automatically set to "N" when the output device is either the SCREEN or
- DISK DRIVE.
-
- This option also allows average sheets to be customized to any
- requirements. By changing the default option to "N", an average sheet may
- be "built" in any order by overlaying sheets created with different print
- options. For example, to print Team Standings first then followed by
- bowler averages and individual awards:
-
- o Select sheet BY AVERAGE and output to PRINTER.
-
- 1) Enter "Y" or "N" to Print League Name option.
- 2) Enter 0 to the Number of AVERAGES option. (No Averages)
- 3) Enter 0 to the Number of HIGH SERIES, Number of HIGH SINGLES,
- Number of HIGH NO MARKS and Number of SIXTY NINES.
- 4) Enter "Y" to the Print TEAM STANDINGS option.
- 5) Enter "N" to the Eject PAGE When Done option.
-
- Print the average sheet by exiting the Print Options Menu with
- the ESC (escape) key.
-
- Since the Eject PAGE When Done option prevents the printer from
- performing a form feed to the next sheet, anything now printed will appear
- after the Team Standings. To conclude this example:
-
- 1) Enter "N" for the PRINT LEAGUE NAME option.
- 2) Enter the required value to the Number of AVERAGES,
- Number of HIGH SERIES, Number of HIGH SINGLES,
- Number of HIGH NO MARKS and Number of SIXTY NINES options.
- 3) Enter "N" to the Print TEAM STANDINGS option.
-
- Print the remainder of the average sheet. The result will be an
- average sheet in the following order:
-
- 1) League Name.
- 2) Team Standings.
- 3) Averages.
- 4) Individual Awards.
-
- By varying the "Y"/"N" and number entries to the various print
- options, BowlStat can build a printout to any requirements. Once the
- desired format has been obtained, the individual options can be saved to
- disk as a set and loaded back in to speed up the printing process. In the
- above example, the two separate sets of print options could be saved to
- disk under the filenames of PART1 and PART2. Then, to print the average
- sheet, the options can be loaded back into BowlStat.
-
- Once the ESC (escape) key has been pressed to exit the Print
- Options Menu, BowlStat will ask if the print options currently in effect
- should be saved to disk. If they are, enter "Y" to the following
- confimation prompt: "Save Print Format? (Y/N):". Enter a filename (maximum
- length of 8 characters) in which to store the print options.
-
- NOTES: Average sheet building is also possible to the DISK DRIVE. When
- prompted for a name to save the average sheet under, enter the
- same name as a previously printed average sheet. BowlStat will
- ask the following confirmation: "SHEET EXISTS! OK to APPEND to
- it? (Y/N):". Enter "Y" and press the "Enter" or "Return" key.
- The sheet, as defined by the current print options, will be
- appended to the file currently on the disk drive.
-